SARCASIM SPRINKLE

Heat press instructions:
Must be applied with a heat press, a standard household iron WILL NOT work

FOR COTTON-

The heat press should be set to 325 degrees, (some heat presses vary, adjust accordingly)

• Pre-press the fabric for 10 seconds to remove the moisture.
• Place the DTF Transfer on the fabric with a Teflon sheet on top and press for 15 seconds with high pressure. 
• Remove the fabric from the heat press and wait for the DTF Transfer to cool down completely, then peel. COLD PEEL
• Place the fabric back onto the heat-press, use a Teflon sheet or parchment paper on top, and press for 5-7 additional seconds. 

FOR POLYESTER-

The heat press should be set to 270 degrees, (some heat presses vary, adjust accordingly)

• Pre-press the fabric for 10 seconds to remove the moisture.
• Place the DTF Transfer on the fabric with a Teflon sheet on top and press for 15 seconds with high pressure. 
• Remove the fabric from the heat press and wait for the DTF Transfer to cool down completely, then peel. COLD PEEL
• Place the fabric back onto the heat-press, use a Teflon sheet or parchment paper on top, and press for 5-7 additional seconds.